Tuesday, August 18, 2009

Odyssey Update

I've got all the fins cut and coated with wood glue. The sizing was TLAR - That Looks About Right.

Screw eye glued into the nose cone.

One of two MMT centering rings slit and the shock cord knotted and passed through.

Edit, 212pm:

I've got the third of three large fins gluing right now; After that will be fillets, then the small fins, then dowels, which go on the tips of the large fins. The original dowels were 1/8", so I'll use toothpicks which are approximately scale. The nose cone screw eye mounting is dried.

No comments: